ポータルタイプの圧入プレス機
Hydraulic pull-in device for mounting bearings
max. pulling force 100 kN, stroke up to 200 mm, horizontal design
Application
The bearing press is suitable for the easy assembly of bearings, plain bearings or sleeves/bushings by hydraulically pulling them into the bearing seat.
Principal use
• Industrial assembly workstations
• Mounting bearings in housings
• Maintenance work
• Bearing assembly on large/heavy components
The bearing press is designed for the hydraulic insertion of bearings into housing components and is available in a horizontal design.
Guided on a knuckle boom crane with a balancer (not included in the delivery), the bearing press can be used ergonomically anywhere and can also be mounted on a trolley. The pull-in cylinder can be used either from the right or left by converting the hydraulic cylinder.
The device is operated by means of a two-hand control. The pulling force of the cylinder can be adjusted within a range of 10 to 100 kN.
The power unit and control unit can optionally be mounted on a crane column. A hand guard and easy-to-control travel speed ensure the necessary safety.
Joining process
The assembly process takes place in four steps: First, the bearing is placed on the bearing holder, then the tie rod is passed through the bearing bore and the counterholder is placed on the end of it. The counterholder is held on the tie rod by a spring-loaded contact piece. The cylinder is then retracted so that the bearing is pulled into the bore hole. Customised contact pieces can also be manufactured if required.
Control function
The pulling force is adjusted by a pressure switch on the power unit. Two switchable force levels can be preset.
Setting mode
Retraction and extension using two-hand operation, direction preselection via rotary switch.
Automatic mode
The cylinder retracts until the set force is reached and then automatically reverses direction and returns to the off-position.
Delivery
• Pull-in cylinder
• Power unit with control unit
Not included in our delivery are the hydraulic hoses and cables, which must be ordered separately as accessories depending on the
length as well as other accessories.
Accessories
• Balancer for suspension
• Bearing holder
• Counterholder with contact pieces
• Hydraulic hoses
• Cables
• Velcro protective hose
• Quick-disconnect coupling
● Easy to use thanks to suspension on a balancer (available as an accessory)
● High safety standard through compliance with the Machinery Directive
● Process reliability thanks to adjustable joining forces and automatic sequence
● Low noise level
● For bearings with an inner diameter of at least 40 mm and a maximum outer diameter of 145 mm
| アイテム番号 | CADデータ | 商品の説明 |
|---|---|---|
|
アイテム番号
|
商品の説明
Balancer zur Aufhängung
max. Traglast 25 kg
nach Katalogblatt P1.300
|
|
|
アイテム番号
|
商品の説明
Lagerhalter Rohling
zur individuellen Anpassung
Material: Vergütungsstahl, brüniert
nach Katalogblatt P1.300
|
|
|
アイテム番号
|
商品の説明
Gegenlager Rohling
incl. zwei federbelastete Druckstücke
zur individuellen Anpassung
Material: Vergütungsstahl, brüniert
nach Katalogblatt P1.300
|
|
|
アイテム番号
|
商品の説明
Anschlusskabel - 5 Meter, 8-polig
mit Kabelstecker M12 gewinkelt
nach Katalogblatt P1.300
|
|
|
アイテム番号
|
商品の説明
Anschlusskabel - 5 Meter, 5-polig
mit Kabelstecker M12 gewinkelt
nach Katalogblatt P1.300
|
|
|
アイテム番号
|
商品の説明
Anschlusskabel - 10 Meter, 8-polig
mit Kabelstecker M12 gewinkelt
nach Katalogblatt P1.300
|
|
|
アイテム番号
|
商品の説明
Anschlusskabel - 10 Meter, 5-polig
mit Kabelstecker M12 gewinkelt
nach Katalogblatt P1.300
|
|
|
アイテム番号
|
商品の説明
Hydraulikschlauch - 5 Meter
nach Katalogblatt P1.300
|
|
|
アイテム番号
|
商品の説明
Hydraulikschlauch - 8Meter
nach Katalogblatt P1.300
|
|
|
アイテム番号
|
商品の説明
Klett-Schutzschlauch
10 m, beliebig kürzbar
nach Katalogblatt P1.300
|
ログインエリアの無料特典をご利用ください:
- CADデータのダウンロード
- 取扱説明書をダウンロードする
お帰りなさい！すでに登録済みのユーザーアカウントにログインしてください